, , , , ,

LED Cube

Reading Time: 3 minutes

Sebastian spent some time working on the design and aesthetic of the cube, although ‘technically’ it’s not a cube, as he explains. “Since the cube is designed to be stationary and usually only viewed from one side, it is not actually a complete LED cube, but only has three sides with LED matrix panels. Those panels consist of 64×64 RGB LEDs across a side length of 128mm. They are held by a 3D-printed frame, which also holds a Raspberry Pi 2 and an LED Matrix Bonnet from Adafruit.”

Glorious graphics

Sebastian arranged the three panels so that they are daisy-chained to the Matrix Bonnet, which also distributes the 50W from the power supply (5V, 10A). This was the more straightforward element of the whole design, as he tells us. “One could say that I mostly put together a few parts that were meant to be assembled just like this. The trickier part was software, because I did not just want simple pixel graphics or a pre-rendered animation. Even at only 3×64×64 pixels, it soon became clear that the CPU cannot deal with all the pixels in sequence, but that I had to use OpenGL.”

The workings within the three-sided cube

The glowing visual element of the Cube is stunning, with the background colour determined by his PC’s Ryzen 5 CPU temperature, and the thickness of the ring changing in relation to usage of threads on the CPU. Sebastian achieved these graphics by using OpenGL Shader: “Instead of iterating over each pixel, one writes a fragment shader – a small (and rather limited) piece of code that is executed independently for every single pixel. With this independent execution, every pixel can be done in parallel as much as the hardware supports this. I did not end up with a particle system, but this allows for an animation that covers all pixels and with something going on in every part of the image.”

Power management

Sebastian had very little fine-tuning to do, once he’d figured out how to use OpenGL. “I had to be careful about the maximum brightness because the power supply is a bit too weak to handle full white for all LEDs. So, I had to avoid getting too close to a white cube as the Raspberry Pi would become unstable at this point,” he reveals.

The Cube in action on Sebastian's desk - an impressive setup

He also made the Raspberry Pi file system read-only in order to avoid the possibility of data corruption when unplugging the cube. “This way, I could just cut the power at any time without worrying about file corruption. The cube is now simply plugged into a socket strip which turns off whenever the PC does not draw any power on a controlling socket.”

Sebastian’s colourful creation has garnered much interest from others, which surprised him initially as he was aware that such a cube was not a new concept. “I got extremely positive reactions and a much wider coverage than I expected,” he says. “I think that my presentation in the video was good and that there is a slightly different appeal to it as it has some kind of function, while having very fascinating visuals.”

Facebook Comments

Genshin Impact V1.2: Es wird frostig in Dragonspine

Four new products: IQaudio is now Raspberry Pi