Schlagwort: Cyberpunk

  • Designing a DIY watch with a brass ‘cyberpunk-y’ aesthetic

    Designing a DIY watch with a brass ‘cyberpunk-y’ aesthetic

    Reading Time: 2 minutes

    Designing a DIY watch with a brass ‘cyberpunk-y’ aesthetic

    Arduino TeamJune 20th, 2022

    The cyberpunk aesthetic, like several other genres, often takes the form of heavy and metallic body modifications or devices that are meant to signify a more futuristic society. Inspired by the video game Deus Ex, Redditor Star_11 had the idea to create their own smartwatch primarily out of soldered brass sheets and 3D-printed plastic.

    Within this space-age bracelet is an Arduino Nano Every, which controls the connected Crystalfontz SSD1320 flexible OLED display. On it, the watch can currently show the time and date, although other information such as the level of the 280mAh battery, alarms, and timers might be added in the future. Star_11’s plan is to also take a Nano 33 IoT and replace the Nano Every for extra IoT functionality or connect to a phone via Bluetooth®.

    Although the watch’s three-pin magnetic pogo connector appears to be used for recharging the device, Star_11 intended it for use with a custom input ring that slips around the wearer’s finger and houses a single pushbutton. However, later iterations might swap this out for a small joystick so that the GUI is easier to navigate.

    To see more about how Star_11 built this cyberpunk-themed smartwatch, head over to their Reddit post here.

    Website: LINK

  • Transform Raspberry Pi 400 into a hacker cyberdeck

    Transform Raspberry Pi 400 into a hacker cyberdeck

    Reading Time: 3 minutes

    Resisting the desolate consumerism of the suburbs is a serious business for hardware hacker Zack Freedman. Zack transformed a Raspberry Pi 400 into the Voidstar Data Blaster, a portable cyberdeck to fight against becoming a normie.

    [youtube https://www.youtube.com/watch?v=guGffGw3uDg?feature=oembed&w=500&h=281]

    The suburbs thing is explained at the beginning of Zack’s build video. Subscribe to his YouTube channel.

    Hang on, what is a cyberdeck?

    Zack explains:

    “A data blaster [cyberdeck] is the trademark battlestation of console cowboy antiheroes running nets through cyberspace.”

    There’s a whole subreddit devoted to exploring what does and does not make a real-life cyberdeck, so if you were looking for a rabbit hole to go down, knock yourself out.

    view of cyber deck on a desk
    Punky

    How do you turn a Raspberry Pi 400 into a cyberdeck?

    Added features to transform a Raspberry Pi 400 into the Voidstar Data Blaster include:

    • Detachable wearable display
    • Battery handles
    • SDR receiver
    • Antennae
    • 1280×480 touchscreen
    data blaster strapped to forearm of maker
    Wear your data blaster with pride

    Handles make the cyberdeck nice and portable. Console cowboys can also use them to flip the deck up onto their forearm and easily “jack in” to cyberspace.

    Rules around which keyboard you can use on a legitimate cyberdeck are pretty tight. It can’t be touchscreen (because that means it’s a tablet); however, it can’t fold away on a hinge either (because that makes it a laptop). Enter Raspberry Pi 400, a computer built into a mechanical keyboard about the length of an adult forearm. Perfect.

    The SDR receiver means that users are cyber snooping-ready, while the head-mounted display provides a cyberpunk design flourish. That display acts as a second screen alongside the mini touchscreen. You can drag anything from the main display into sight on the headgear.

    Authentic cyberpunk aesthetic

    A lot of trial and error with a 3D printer finally yielded a faceplate that allows the screen and headgear to fit in perfectly. Zack also designed and printed all the flair and logos you see stuck around the cyberdeck. LEDs make the decorative filament fluoresce. Integrated pegs keep all the wiring neat – an inspired practical addition.

    Rear view of the underside of the data blaster
    The underside of the data blaster

    Here are all the STL files if you’d like to create your own cyberdeck. And the design files let you take a closer look at a 3D render of Zack’s creation.

    We saved the best bit for last: not only can you play Doom on the Voidstar Data Blaster, you can play it on the wearable display. Stay punk.

    Website: LINK

  • Cyberpunk 2077 ,24 Hours Later – Photo Gallery

    Cyberpunk 2077 ,24 Hours Later – Photo Gallery

    Reading Time: < 1 minute

    Cyberpunk 2077 ,24 Hours Later – Photo Gallery

  • Die Cyberpunk-Welt von ANNO: Mutationem erscheint für PS4

    Die Cyberpunk-Welt von ANNO: Mutationem erscheint für PS4

    Reading Time: 3 minutes

    Wir sind ThinkingStars und unserer Spiel ANNO: Mutationem bietet auch euch die volle Mischung. In unserem Spiel vermischen sich 2D- und 3D-Modi, Action- und Adventure-Gameplay, Sprites und Polygon-Modelle, gepaart mit einigen RPG-Elementen – und schon haben wir ein richtig lebendiges Spiel in einer wuseligen Cyberpunk-Welt. Wie funktioniert dieser Wechsel zwischen 2D- und 3D-Modus eigentlich genau?

    Zunächst steuert ihr Ann, die Hauptprotagonistin. Als Einzelgängerin und Eine-Frau-Armee wird sie von ihrer Hacker-Freundin Ayane unterstützt. Zu Beginn des Spiels seid ihr im sogenannten Erkundungsmodus und der lässt sich genau wie euer Lieblings-Action-RPG steuern: Ihr bewegt euch in einer 3D-Umgebung, sprecht mit NPCs und interagiert mit eurer Umwelt. Nur keine Eile, es ist eure Welt.

    Auf eurer weiteren Reise wechselt ihr dann nahtlos in den 2D-Kampfmodus, in dem Ann ihre dicken Schwerter und Handwaffen zückt und ein schnelles wie tödliches Kampfballett aufs Parkett legt. Im Kampf sind Doppelsprünge, Ausweichschritte und gut getimte Bodenhiebe überaus wichtig. Das kennt ihr schon von euren Lieblings-Actionspielen in 2D, ebenso wie die aufregenden Plattformer-Level und die mächtigen Bosskämpfe. 

    Das wirkt überaus dynamisch und sieht echt cool aus, und wir hoffen, dass ihr es genauso seht. Neben dem stylishen Grafikstil muss sich unser Gameplay aber nicht verstecken. 

    Die Pixel-Grafik und die 2D-Sprites sind eine Liebeserklärung an die Spiele, mit denen wir aufgewachsen sind. Mit der heutigen Technik können wir gigantische Städte und Umgebungen in einer modernen Optik erschaffen, die genau dieses Hybrid-Gefühl einfangen, das perfekt zur Cyperpunk-Umgebung passt.

    Im Trailer könnt ihr eine der größeren Städte sehen, die Spieler nach Belieben erkunden können. Ihr könnt dabei durch Menschenmassen auf den nächtlichen Straßen streifen, für eine kleine Pause zwischendurch in Anns Wohnung zurückkehren und eure E-Mails checken oder eure Vorräte in einem der örtlichen Läden aufstocken. Wie in vielen Action-Rollenspielen üblich könnt ihr auch hier eure Ausrüstung mitsamt den Verbesserungen kaufen, verkaufen oder selbst herstellen. Ausgeschlafen und mit Vorräten versorgt, könnt ihr mit Ann zur nächsten Mission aufbrechen.

    Die Schauplätze von ANNO: Mutationem sind durch und durch Cyperpunk, angefangen bei der vertrauten Architektur bis hin zu den obligatorischen Neonlichtern. Trotzdem ist in unserem Trailer eine abscheuliche Reptilienbestie und eine albtraumhafte Szene mit Meer aus Blut und unheimlichen Statuen im Hintergrund zu sehen. Unsere Welt strebt eben nach mehr. Nach mehr Bizarrem und Unheimlichem.

    Diese surrealen Elemente spiegeln sich auch in der Handlung wider, aber wir wollen hier nicht zu viel verraten. Aber ihr könnt uns vertrauen: Die Handlung hält so einige verzwickte, verdrehte und kaum zu fassende Wendungen bereit, die auch nicht selten staunend zurücklassen werden.

    Wir hoffen, dass sich unsere Spieler sich auf diese Cyberpunk-Welt einlassen und sie ihnen gefallen wird. Diese Welt soll sich wie eure eigene Welt anfühlen. Füllt sie mit euren eigenen Erinnerungen, Erlebnissen und Eindrücken, während ihr immer mehr Charaktere trefft. Spürt richtigen Nervenkitzel in den Kampf- und Action-Abschnitten und taucht immer tiefer in die sich langsam entfaltende Geschichte ein.

     Um es kurz zu machen, wir heißen alle in der Welt von ANNO: Mutationem herzlich willkommen. Aber bringt lieber eine Knarre und einen kybernetisch verbesserten Arm mit.

    Website: LINK

  • Go all cyberpunk with this laser-spiked jacket!

    Go all cyberpunk with this laser-spiked jacket!

    Reading Time: 2 minutes

    Go all cyberpunk with this laser-spiked jacket!

    Arduino TeamApril 9th, 2019

    Your leather jacket might look cool, but one thing it’s missing—unless you’re maker “abetusk” or perhaps a Japanese musician—is lasers! 

    After seeing Yoshii Kazuya’s laser-spiked outfit, ‘tusk decided to create an excellent version of the getup by embedding 128 laser diodes embedded in his own jacket. These lasers are powered by an Arduino Nano, along with a pair of I2C PWM output boards, allowing them to be switched in sets of four. 

    The lasers can be controlled either by joystick, via a microphone in order to react to sound, or in a looping ‘twinkle’ pattern. 

    More information on the project is available in this write-up as well as on GitHub, which includes Arduino code and other files needed to build your own.

    After seeing Wei Chieh Shi’s laser jacket design, I wanted to create my own. These instructions show how to modify a jacket to add laser diodes and control them electronically to produce different laser light patterns. The laser diodes give the jacket an appearance of being “spiky”, like having metal spikes but with red laser light. The effect is especially striking in environments with fog or smoke as the laser light path shows a trail from where it originates.

    The concept and execution is relatively simple but care has to be taken to make sure that the electronics, wiring and other aspects of the jacket don’t fail when in use. Much of the subtlety and complexity of the project is providing proper wire routing and making sure that strain relief for the electronics and connections is provided so that it’s resilient under normal wear.

    Assuming the basic parts are available (soldering iron, multimeter, wire strippers, laser cutter, etc.) I would estimate that this project is about $300 in raw materials and about 20 hours worth of labor.

    Depending on the battery used, the jacket can operate for about an hour or two continuously. Spare batteries can be carried around and used to replace the depleted batteries if need be.

    [youtube https://www.youtube.com/watch?v=gdBWdDNlHQY?feature=oembed&w=500&h=281]

    Website: LINK