in , ,

Draw on bottles using a CNC plotter made from old printer rollers and other scraps

- Werbung -
2 min read
Reading Time: 2 minutes

Draw on bottles using a CNC plotter made from old printer rollers and other scraps

Arduino TeamNovember 12th, 2020

To label used bottles that would otherwise go to waste, “tuenhidiy” created a CNC plotter that itself consists mostly of scraps!

- Werbung -
- Werbung -

The machine’s X and Z axes are formed out of a pair of old CD/DVD players, but instead of a traditional Y axis, it actuates two printer rollers to turn a bottle forwards or backwards. This allows the marking pen to be placed in just the right axial position, while still being very similar to a fully Cartesian (XYZ) plotter controls-wise.

– Werbung –

Everything is powered by GRBL running on an Arduino Uno, which interfaces with its four steppers via a CNC shield and A4988 driver modules. Build info is available in tuenhidiy’s write-up, and you also check it out in the video below.

- Werbung -

Website: LINK

- Werbung -

Report

- Werbung -

What do you think?

26 Points
Upvote Downvote
Advocate

Written by Quad Oner

LEGENDS MAY SLEPP BUT THEY NEVER DIE

Content AuthorYears Of Membership

Schreibe einen Kommentar