in , , , ,

Raspberry Pi loft bed

- Werbung -
Reading Time: 3 minutes

“This March, two friends of mine organised a Raspberry Jam in my hometown, Amsterdam.” Jolien explains. “There I saw some really cool projects. Living in Amsterdam, more living space in my apartment is always very welcome and I’ve wanted a loft bed for some time.”

Instead of simply modifying an existing bed, Jolien went the extra step and built her own, using just a jig-saw and drill as that’s all she had.

- Werbung -
- Werbung -

“I built a double loft bed in a tree-house style with LED lights and an embedded display with a clock and the weather forecast,” she says. “The control panel also has three buttons which can be used to turn the lights on and off. The light strands I bought were connected to battery packs, so I cut those off and wired the strings to a Raspberry Pi.” The bed is approximately 3 m by 1.7 m and its height is 2.6 m, while its steps also function as shelves for the ground floor.

The control box uses a simple LCD display for weather and time

Loft Bed: Quick Facts

  • Jolien tied the safety nets herself

  • It all runs off a single Raspberry Pi (for now)

  • There’s approximately six metres of light strips

  • The control panel buttons are arcade buttons

  • Weather forecasting was a later addition

When we asked Jolien how much wood she used, she merely said ‘a lot’

Building and wiring

“When I started building, I wasn’t sure what features I wanted to add and Raspberry Pi is very flexible,” Jolien recalls. “It’s also very easy to set up SSH, which was necessary since the electronics are embedded in the side panel and can’t be reached directly.”

For just a bed, it’s got some fairly advanced tech in it, as Jolien reveals: “Besides the control panel in the bed, I also made a progressive web app which enables me to turn the lights on/off and set an alarm via my smartphone. If the alarm is triggered, Raspberry Pi turns on the lights and a song is played. Everything runs on Python and I used Python Flask to make an API on Raspberry Pi so that the GPIO pins connected to the lights can be turned HIGH and LOW from the outside.”

Sleep on it

It sounds amazing already, and we’d probably put down some serious cash for a product version of it. However, Jolien isn’t quite finished yet. “I think this project took me about 100 hours in total,” she says. “At this moment, the speaker is not attached yet; I will do this next week. I also want to design a 3D-printed laptop wall mount for the ground floor.”

We’re eager to see what else Jolien can come up with to add to an already very impressive project.

- Werbung -

The finished loft bed offers a luxurious sleeping experience

- Werbung -

Report

- Werbung -

What do you think?

Schreibe einen Kommentar